20-63mm PE PPR PP Pipe Machine On Shipment To Africa.

Introduction:

• Raw material PE particles;
• Production specification 32-75mm;
• Production speed ≈ 0.5-18m/min
• Maximum output ≈ 150kg/h
• Equipment size ≈ 45 × 5 length * width (m)
• Installed power ≈ 95kw
• Actual power consumption ≈ 75kw
• Air pressure 0.6mpa
• Water circulation rate 0.3m3/min
• Power supply voltage AC, 380V ± 10%, 50HZ
• Water source, industrial consumption, purified water and filtered water, water pressure: 0.4Mpa, water temperature: 25 ℃.
• Working temperature 0-40 ℃

20-63mm PE PPR PP Pipe Machine Equipment Lists:

• Feeding machine dryer 700G & automatic feeding
• Single screw high-efficiency extruder SJ-60/38
• SJ-25/25 single screw extruder with 1 identification line for extrusion
• Head mold 20-63, mouth mold core rod coated with PTFE
• Vacuum sizing box LHDJ-75, 1 unit, 6 meters long, including shaping sleeve
• Cooling water tank LHPL-75, 1 unit, 6 meters long
• Tractor LHQY-75, 1 set, 2-jaw traction
• One LHQG-75 chip free cutting machine with automatic cutting function
• Pipe stacking rack LHFZ-6000, 1 unit, 6-meter
• Curling machine with a diameter of 20-63
• one single station winding machine
• Temperature control meter Siemens electrical components
• weight control system can be selected by the customer according to their requirements

GET A QUOTATION NOW

The reason why PE conduit passes through wires. 
According to regulations, wires must pass through conduit when wiring indoors, mainly for the following reasons

1. Wiring foundation

Crossing pipelines is the foundation for laying "live wires", laying the groundwork for future maintenance, replacement, and home intelligence of the power lines.

2. Protect the insulation layer

The threading tube can prevent damage to the insulation layer of the wire. If directly buried in cement mortar, silicate may corrode the insulation layer of the wire, leading to a decrease in insulation and causing a short circuit;